Torfino Enterprises has selected iPower as the rechargeable battery supplier of choice for use in the Metal-Tec 1400 Security wand, and Ice Light Safety & Tactical lights. iPower is dedicated to serving Torfino Enterprises’ customers by making iPower batteries and chargers available directly from IpowerUS. Please read Torfino Enterprises white paper Click here, they have addressed the limitations of using rechargeable batteries in their products, should customers require the use of rechargeable batteries.

The iPower lithium polymer 9 volt PP3 rechargeable battery is the first and only rechargeable 9 volt battery that can be used in place of alkaline disposable batteries and still obtain favorable results. The PP3 9 volt actually exceeds Alkaline battery performance in cold weather. Other benefits include: RoHS safe material (Lead Free), low self discharge rate, fast charging rate with wall charger or 12 volt mobile adapter, make iPower Li-Polymer batteries one of a kind.

Torfino Enterprises

White paper report from Torfino Enterprises

(excerpt:)

"Torfino Enterprises, Inc. has tested and approved rechargeable batteries and chargers from I-Power for use in the METAL-TEC and ICE Light products. Although our products have been designed to use a standard disposable 9V alkaline battery, when rechargeable batteries are required we have found the I-Power Lithium polymer battery offers the maximum run time on a single charge and is far superior to anything else that is currently available."

For more information regarding our findings on rechargeable batteries please click here for our full report.

iPower 9V 500mAh Li-Polymer Rechargeable Battery

Special Professional Applications Lithium Polymer 9 volt/PP3

Charge only with iPower Lithium 9 volt charger
Special design with Li-Polymer cell, capacity up to 500mAh.
Lithium-Polymer material, Working voltage 8.4V~6.5V,
Standard output current 1~500mA,
Hi-rate continue output 750mA,
Max. Transient current up to 1500mA/15 sec.
Build-in Protection IC to control over-current and voltage.

iPower 9V 520mAh Li-Polymer Rechargeable Battery

Highest possible power output/runtime rechargeable in a 9Volt/PP3

Charge only with iPower Lithium 9 volt charger
Highest Real Capacity on the market
Developed for critical applications in Film Broadcast,
Military and Education.
Special design with Li-Polymer cell, capacity up to 520 mAh.
Lithium-Polymer material, Working voltage 8.4V~6.5V,
Standard output current 1~500mA,
Hi-rate continue output 750mA,
Max. Transient current up to 1500mA/15 sec.
Build-in Protection IC to control over-current and voltage.

iPower 9Volt Fast Smart Battery Charger

For Li-Polymer, Li-ion , Ni-MH, Ni-CD (9.6V, 8.4V & 7.2V) Batteries

Shipped with AC mains 12 volt plug, and 12 auto power plug

Li-Polymer (Li-ion) Batteries Charging mode:

4 channels independent charging each 9V battery.
Super fast charge Li-ion 9V battery in 1 hour.
Auto detection, auto protection and auto stop.
Dual color LED display (Charging: Red, Full: Green)

IMPORTANT!

This charger is also capable of charging other battery types as listed below, it is however not recommended to use these types of batteries with the Metal-Tec or Ice Light products. Be sure to keep the switch located on the side of the charger unit set to Li-Ion battery when using the Li-Polymer batteries listed above and never mix battery types when charging. Refer to Manufactures instructions before charging batteries.

Ni-MH (Ni-CD) Batteries Charging mode:

4 channels independent charging each 9V battery.
Negative Delta V and Zero Delta V program control.
Auto protection with voltage and timer control.
Auto detection and charging 7.2V / 8.4V / 9.6V battery.
Super Fast Charging Ni-MH & Ni-CD 9V battery in 2 hours.
Safety Protection (Dual Mode):
High Temperature, Reverse insert, Damage battery.